戻る





 

Specification (日本語ページはこちら)
Model Number Single shaft PF243P-A PF244P-A PF245P-A
Double shaft PF243P-B PF244P-B PF245P-B
Holding torque 0.233N・m 0.341N・m 0.43N・m
Rotor inertia 33gcm2 56gcm2 72gcm2
Basic step angle 1.8°
Winding Coil type Uni-polar
Rated current 0.8A/Phase 1.2A/Phase 1.2A/Phase
Rated voltage 5.1V 4.0V 4.6V
Coil resistance 6.4Ω 3.3Ω 3.8Ω
Inductance 4.9mH 3.6mH 3.8mH
Dielectric Strength No abnormality detected after the application of 500V at 50Hz between motor windings and frame for duration of one minute.
Insulation Class Class B
Insulation Resistance 100M ohms or better with 500V potential applied between motor winding and frame at normal ambient temperature and humidity.
Environmental temperature 0℃〜+40℃
Weight 0.23kg 0.29kg 0.36kg
Jump to each motor dimension by clicking motor model
Model Number Single shaft PF264P-A PF265P-A PF268P-A
Double shaft PF264P-B PF265P-B PF268P-B
Holding torque 0.678N・m 1.106N・m 1.876N・m
Rotor inertia 145gcm2 245gcm2 470gcm2
Basic step angle 1.8°
Winding Coil type Uni-polar
Rated current 2.0A/Phase 2.0A/Phase 2.0A/Phase
Rated voltage 2.6V 3.4V 5.0V
Coil resistance 1.3Ω 1.7Ω 2.5Ω
Inductance 2.0mH 3.0mH 4.9mH
Dielectric Strength No abnormality detected after the application of 500V at 50Hz between motor windings and frame for duration of one minute.
Insulation Class Class B
Insulation Resistance 100M ohms or better with 500V potential applied between motor winding and frame at normal ambient temperature and humidity.
Environmental temperature 0℃〜+40℃
Weight 0.51kg 0.71kg 1.11kg
Jump to each motor dimension by clicking motor model

Here is information of previous PF series.
(PF243-A,B PF244-A、B PF244H-A,B PF264-A,B PF265-A,B PF268-A,B)


Torque data
(Enlarged view by clicking each torque data)