戻る

 




Because of built-in low vibration circuit, the vibration is extremely depressed than previous ones.

Microstep high resolution driving(Maximum 1/100)

About 10% of power consumption is saved compared with previous one.

 

Here is introduction movie of ISD series vibration comparison.

 日本語ページはこちら Japanese here
Items ISD200-120L ISD200-220L
Power voltage DC24V±10%
Power consumption 40W 60W
Driving type Uni-polar constant current type
Driving current Max 1.0A Max 2.0A
Basic step angle 1.8°
Resolution Basic step angle(1.8°) is divided into 1/1, 1/2, 1/1.25, 1/5, 1/10, 1/20, 1/50 or 1/100.
Function ・ Switching of pulse input type
・ Driving current off function
・ Auto current down function
・ Excitation timing zero signal output
Signal input 1 pulse type(PULSE, DIR), 2 pulse type(CW, CCW), Current off(CO)
・ Photo coupler input : input resistance 220Ω
・ Input signal voltage, L:0〜0.5V H:4〜5V
Signal output Excitation timing zero signal(MONI)
・ Photo coupler open collector output, Limited capacity is 25V 10mA or less
Insulation Resistance 100MΩ or higher with DC500V applied in normal temperature and humidity.
・ Between power input/ motor leads and PE terminal
・ Between power input/ motor leads and Signal I/O terminal
Operating environment temperature and humidity
0 to +40℃, Less than 80%, No freezing and No condensation
Storing environment temperature and humidity
-10 to +60℃, Less than 80%, No freezing and No condensation
Operating height Less than 1000m from sea level
Atmosphere
In room without corrosive gas, flammable gas or dust. No dash oil or water over. 
Weight 155g
Dimension 106 x 72 x 34mm (Not include screw head)
Applicable motor 2-phase stepping motor
PF243-A(B) PF244-A(B)、PF244H-A(B)
PF266-A(B)、PF264-A(B)
PF268-A(B)