“ú–{Œê”Ńy�[ƒW‚Í‚±‚¿‚ç Japanese here Features Selecting resolution can drive same step angle with 5 phase stepping motor at low cost. 5nm pitch control is available if 1mm pitch ball gear is used. |
| Model number | SND100-220L | ||||
| Power voltage | DC24V�}10% | ||||
| Power consumption | Less than 85W | ||||
| Driving type | Uni-polar constant current type | ||||
| Output current | 2.0A/phase | ||||
| Resolution |
Basic step angle is divided into
1�A2�A2.5�A5�A8�A10�A20�A25�A40�A50�A100�A125�A200�A250�A500 or1000
|
||||
| Function | Auto-current down | ||||
|
Signal input
|
Input type |
Photo coupler input : Input resistance 220Ħ Input signal
voltage, L�F0 - 0.5V�@H�F4 -5V
|
|||
| �ECW �iPULSE�j |
CW direction movement pulse command input (Movement command
pulse input in case of 1 pulse input type)
|
||||
| �ECCW�iCW/CCW�j |
CCW direction movement pulse command input (Rotation
direction input in case of 1 pulse input type
|
||||
| Insulation Resistance |
100MĦ or higher with DC500V applied in normal temperature and
humidity between power input/ a lump of motor leads and PE terminal and between
power input/ a lump of motor leads and signal input terminal
|
||||
|
Operating environment temperature and humidity
|
0 to +40�Ž, Less than 80%, No freezing and No
condensation
|
||||
|
Storing environment temperature and humidity
|
-10 to +60�Ž, Less than 80%, No freezing and No condensation
|
||||
| Dimension | 106�~67�~26.6mm�@Dimension | ||||
| Weight | 120g | ||||
| Driver model number | Auxiliary function | |||
| MONI | CO�@ | HEAT | Power fuse | |
| SND100 | �| | �| | �| | �| |
| SND101 | �œ | �œ | �| | �| |
| SND102 | �œ | �œ | �œ | �| |
| SND110 | �| | �| | �| | �œ |
| SND111 | �œ | �œ | �| | �œ |
| SND112 | �œ | �œ | �œ | �œ |
| �|:No function �œ:Built-in function Please understand that we may make modifications to our products without notification in order to improve the capabilities and external appearance of our products. |