CE mark approved （日本語ページはこちら） Video to compare INS50 performance has been finished. High resolution, low vibration and stop accuracy are compared. Explanation page for torque control function is here.

Features NanoDrive high resolution positioning Maximum 500,000 division/ revolution Minimum 1 pulse moving distance : 0.00072°(when basic step angle is divide by 1000) Selectable resolution from 16 types. accuracy and high resolution are available with equiangular division. Even if NanoDrive movement, same torque and speed with full step movement are realized. Positioning with ultra low vibration is available. Useless torque field is cut by MYCOM own torque control function In the past there is a useless torque upsurge between middle speed and high speed, which is a source of heating. INS50 series succeeds to depress the upsurge without sacrifice of high speed performance and realizes to depress heating and power consumption. Wide power supply and driving current are supported. AC100-120V input ： INS50-110（1.4A/phase）　INS50-210（2.8A/phase） AC200-220V input ： INS50-120（1.4A/phaee）　INS50-220（2.8A/phase） Low power consumption Maximum 50% depressed (comparison with ours) Compact size 1.4A/phase type   About 80% compact size compared with our UPS52 series 2.8A/phase type   About 60% compact size compared with our UPS53 series CE marking attached.

Specification Model number INS50-110 INS50-210 INS50-120 INS50-220 Input Voltage AC100 − 120V±10%　50/60Hz AC200 − 220V±10%　50/60Hz Power Consumption 400VA or less 620VA or less 500VA or less 850VA or less Driver Type Star Bi-Polar type Output current 1.4A/phase 2.8A/phase 1.4A/phase 2.8A/phase Resolution 1, 2, 2.5, 5, 8, 10, 20, 25, 40, 50, 100, 125, 200, 250, 500 or 1000 resolution Function Auto-current down at stand still. Auto-Current off.  Output current off, Excitation timing signal output.Driver overheat warning signal output. Resolution select input. Signal input Input type Photo coupler input  input resistance 390Ω  Input signal voltage L：0 to 0.5V　H：4 to 5V ・CW （PULSE） CW direction movement pulse command input (Movement command pulse in case of 1 pulse input type) ・CCW（CW/CCW） CCW direction movement pulse command input (Rotation direction command pulse in case of 1 pulse input type) ・CO input Motor excitation and motor free are controllable. 　H level : Excitation OFF 　L level : Excitation ON ・SEL input This selects which resolution setting switch(SEL1 or SEL2) is active. 　H level : Resolution selected by SEL2 is active. 　L level : Resolution selected by SEL1 is active. Signal output Output type Photo coupler open collector output,　Limited capacity 25V 10mA or less ・MONI This outputs signal when output excitation pattern is excitation zero. ・HEAT This outputs signal when heat sink temperature in driver exceeds 70℃. Dielectric Strength No abnormality detected after the application of 2.0kV(60Hz) between power input/ a  lump of motor leads and PE terminal and between power input/ a  lump of motor leads and signal input terminal. No abnormality detected after the application of 3.0kV(60Hz) between power input/ a  lump of motor leads and PE terminal and between power input/ a lump of motor leads and signal input terminal. Insulation Resistance 100MΩ or higher with DC500V applied in normal temperature and humidity between power input/ a lump of motor leads and PE terminal and between power input/ a lump of motor leads and signal input terminal Operating environment temperature and humidity 0 to +40℃, Less than 80%, No freezing and No condensation Storing environment temperature and humidity 0 to +60℃, Less than 80%, No freezing and No condensation Dimension 165 * 126 * 50mm Weight 1000g

List of motor and driver combination

Motor series Set model number(Torque curve) Motor model Driver model Phase current Power supply PCE series INS50-110-5641AC(BC) INS50-110-5661AC(BC) INS50-110-5691AC(BC) INS50-110-5961AC(BC) INS50-110-5991AC(BC) INS50-110-59131AC(BC) PCE5641-AC(BC) PCE5661-AC(BC) PCE5691-AC(BC) PCE5961-AC(BC) PCE5991-AC(BC) PCE59131-AC(BC) INS50-110 1.4A/phase AC100 − 120V PCE high speed series INS50-210-5692AC(BC) INS50-210-5962AC(BC) INS50-210-5992AC(BC) INS50-210-59132AC(BC) PCE5692-AC(BC) PCE5962-AC(BC) PCE5992-AC(BC) PCE59132-AC(BC) INS50-210 2.8A/phase PCE series INS50-120-5641AC(BC) INS50-120-5661AC(BC) INS50-120-5691AC(BC) INS50-120-5961AC(BC) INS50-120-5991AC(BC) INS50-120-59131AC(BC) PCE5641-AC(BC) PCE5661-AC(BC) PCE5691-AC(BC) PCE5961-AC(BC) PCE5991-AC(BC) PCE59131-AC(BC) INS50-120 1.4A/phase AC200 − 220V PCE high speed series INS50-220-5692AC(BC) INS50-220-5962AC(BC) INS50-220-5992AC(BC) INS50-220-59132AC(BC) PCE5692-AC(BC) PCE5962-AC(BC) PCE5992-AC(BC) PCE59132-AC(BC) INS50-220 2.8Aphase

Remark; PCE5***-AC is single shaft. PCE5***-BC is double shaft. Besides above motor, magnet brake type motor and gear type motor are also supported. Please order by motor and driver set. Specifications are subject to change without notice.